Fuel pressure / Flow rate formula

[Pat Ford]

I think I saw this calc on Bruce bowlings page
( lost the url but I got it from diy-efi)

On Wed, 23 Dec 1998, Bellsouth wrote:

> Date: Wed, 23 Dec 1998 12:16:36 -0500
> From: Bellsouth <n5xmt at bellsouth.net>
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: Re: Fuel pressure / Flow rate formula
> 
> I don't know the formulas, but they should be available here on the web
> site/ftp server.
> -----Original Message-----
> From: jdzura at csc.com <jdzura at csc.com>
> To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
> Date: Friday, November 13, 1998 9:39 AM
> Subject: Re: Fuel pressure / Flow rate formula
> 
> 
> >
> >
> >>You need to know HP of your app etc, then figure out max Lbs/hr fuel you
> >>need to support it, and divide by number of injectors.  Once you have
> >that,
> >>use the next larger size to give you some room for "growth".
> >
> >Can you provide an example of the math? Say for a 400 HP V8
> >
> >
> >
> >Thanks
> >
> >
> >
> >
> 
> 
> 

Pat Ford                           email: pford at qnx.com
QNX Software Systems, Ltd.           WWW: http://www.qnx.com
(613) 591-0931      (voice)         mail: 175 Terrence Matthews          
(613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M 1W8