Motronic Programers

[WILMAN]

----------
> From: Bruce Plecan <nacelp at bright.net>
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: Re: Motronic Programers
> Date: Wednesday, December 23, 1998 10:21 AM
> 
> 
> -----Original Message-----
> From: WILMAN <wilman at hkabc.net>
> Subject: Re: Motronic Programers
> >
> >> From: Bruce Plecan <nacelp at bright.net>
> > Subject: Re: Motronic Programers
> >> -----Original Message-----
> >> From: WILMAN <wilman at hkabc.net>
> >> Subject: Re: Motronic Programers
> >> I have heard of one gentleman that was utterly unimpressed with
> >> what he got from them.  I'd be real sure to get in a conversation, or
> >> better yet in writting exactly what it will allow you to do, and NOT
do.
> >>   I've seen one that was borderline criminal for being an editor.
> >> Better yet, get a demo..
> >> Bruce
> >Are you referring to Racelogic's emulator? What seems to be the problem?
> >I have got one. I do not feel particularly unhappy about it. Am I
missing
> >something
> >that I should have or know?
> 
> As I recall was he was working on a ford, and unable to find much in the
way
> of tables, from what he discribed was a graphic editor, and
> difficult to use, if you not having problems finding the tables then,
> It's working for you.
> Bruce

It's only an emulator. It does not help you to find tables on most ECUs 
except for Bosch Motronic where a free software is included to help to
find tables. It only suggests where the tables are but what they do is for
one to find out himself, using its real time Romwatch facility.  




> >
> >Demo version is available from the web site.
> >http://www.racelogic.co.uk
> >
> >
> >
> >
> >
> >
> >
> >
> >> >> From: R Mehta <rmehta01 at yahoo.com>
> >> >> Subject: Re: Motronic Programers
> >>
> >> >> Yep, I too have been looking into programming the motronic system
for
> >> >> my 1999 Audi A4 Turbo.. I've found a company called Race Logik in
the
> >> >> UK that sells a system for around 1400 pounds (I am not sure that
the
> >> >> exchange rate is) but their software supports most all Motronic
> >> >> systems I think..
> >> >I thought Racelogic did emulators only and not specific Motronic
> >> >programmer.
> >> > ---Dan Llewellyn2 <DanLlwln at ix.netcom.com> wrote:
> >> >> > Does anybody know who has or sells Motronic re-programming
> >> >> > software for a Porsche 3.2 1987 Carrera engine?  I would like to
> >> >> > change injector sizes, switch to mass air flow metering and alter
> >> >> > spark timing.
> >> >> >
> >> >> > I am aware of Protomotive which sells a rather expensive
programmer.
> >> >> > I saw a slick demo program a year or two ago from Jim at
Bonneville
> >> >> > Motor
> >> >> > Werks, but I don't think he is around anymore.
> >> >> > Any other programmers?  I would rather do my own programming than
go
> >> >> to
> >> >> > one of the speed shops that does programming themselves.
> >> >> > Thanks,
> >> >> > Dan
> >>
> >>
> >
>