BUICK 3.8L DIS OUTPUT VS CYLINDER

[Shannen Durphey]

TBK wrote:

>    Which coil output goes to which plug.
>
> TK
> -----Original Message-----
> From: Scott Shotton <stucky at interaccess.com>
> To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
> Date: Monday, February 16, 1998 9:24 PM
> Subject: Re: BUICK 3.8L DIS OUTPUT VS CYLINDER
>
> >What are you looking for?  The firing order? Avaliable KV?
> >
> >I can probably find what you need but you need to be specific so I din't
> >type a basic DIS class.
> >
> >I am asuming this iss a 3.8L VIN C (3800).  If not, let me know.
> >
> >Scott
> >
> >
> >TBK wrote:
> >>
> >> Anybody know the DIS coil output vs cylinder number spark plug wire
> >> routing.
> >>
> >> In otherwords, which coil output is which (what).
> >>
> >> Terry K
> >

  Was hoping to find a good picture to send, but I don't have one here.
Anyway, cyls. 1&4, 5&2, 3&6 are together.  If you can take the coil pack off
the module, yellow/black (underneath) is connected to #1&4, green/black=2&5,
blu&black=3&6.  Hope this helps.

Shannen