GM-HEI Modules

rbraun at mail.enter.net rbraun at mail.enter.net
Sun Feb 22 13:23:46 GMT 1998



> OK, got things mounted up, and noticed that the connector markings are not
> the same that someone told me, so here they are on the 4 pin module, what
> are the functions -

                                 should be these..
> W.......................white wire from pickup
> G  (Smaller pin)....green wire from pickup
> B.........................battery 12v+
> C.........................coil neg term.
> 
> And of course the ground from the mounting.
I always try to keep the heat sink compound off the screws and 
threads in the holes.  This is a good idea is it not?  that stuff is 
non-conductive I believe.
Randy Braun     rbraun at enter.net
91  GTA
82 Firebird



More information about the Diy_efi mailing list