Turbo Sunbird

[John A. Hess]

The "special" adapter is not all that complicated.  Just get yourself a PC board
IDE header,. cut it to the number of pins that the EPROM actually uses (28), and
spread the pins to fit your EPROM ZIF socket.  Works fine and lasts a long time.


H8carbs wrote:

> In a message dated 97-12-31 17:48:16 EST, you write:
>
> << > I have access to an '88 Sunbird turbo chip and I have an EPROM Burner but
> I
>  > don't know the style of the chip to read it.
>  >  >>
>
> This one is a 27128.  You'll need to use an adapter as Peter mentioned,
> to connect to the 14 pairs of pins at the EPROM-end of the carrier.
> Mike V