sequential efi on 440?

[Scott Shotton]

MRASHAN at aol.com wrote:
> 
> In a message dated 98-01-30 08:40:44 EST, you write:
> 
> << With a B&M
>  > Supercharger and Holley Pro-jection.  Has a very nice lope at idle which
> can
>  > be tuned out if i richen up the idle adjustments.  Definitely has moved my
>  > power band into the 4000 rpm and higher range.  and of course, fuel economy
>  > has decreased.
>  > This l'il jeep sounds nasty at WOT w/ dual flowmasters !
>  > I only see about 7 " of vacuum at idle.
>  > Hope this helps.....
>  > Art.
>  A little off the subject, but:  Is your projection digital or analog?
>  And, have you had any problems or agrivations with it?
> 
>  Thanks!
>   Scott
>   >>
> Hi  Scott......I am using the analog 670 cfm pro-jection.  It is a bit too
> large for my cid ( 173ci) , but even so, seems to perform fairly well
> considering its price.  I still need to frequently adjust most settings to get
> proper driveability,  but when its close......this l'il engine sounds angry !
> Its mostly an off road trail and mud racing set up.    I have gone through
> about 6 bad injectors in the last 4 years.
> later,
> Art.


I might be able to save you some money if your injectors keep failing. 
Let me know what model # projection you run and/or injector part # and I
can try to cross it to a different manufacturer that may have better
quality control.

Scott