Knock Sensor Location (Was: Scanner problems)

[Jason Weir]

peter paul fenske wrote:

> Hi Jason
>
> Sounds like the sensor is in too sensitive a spot
> Try using a bunch of teflon tape and don't screw it
> in so tightly. Also move its location.
> Block drain hole is used. The bellhousing is
> sometimes too sensitive

Its mounted to the intake manifold where the stock Jeep sensor was
located, I will have to tap a new hole in the block near where GM would
have put it.  Is there a method to placement or is it rocket science?  I
think that bruce might have hit it on the head when he suggested a new
BBC because I thought that the knock counts went away when I
disconnected the sensor but they didn't..... I still get knock counts
with the sensor unhooked...  Jason

--
Jason Weir - 88 YJ - 258 / Howell TBI  145K and counting
Fayetteville, North Carolina
JTW Web pages at http://home.att.net/~jweir
mailto:jweir at worldnet.att.net