ZZ3 and TBI
Shannen Durphey
Shannen at mcn.net
Sun Jul 5 06:14:15 GMT 1998
John Zarli wrote:
> Shannen Durphey wrote:
>
> > Thanks John.
> >
> > You didn't mention this, but are your Crane rockers 1.5 ratio stamped type?
> > Shannen
> >
>
> I am using Crane narrow body "gold race" rockers. Note that while all <1988
> heads may use a stamped version of a self aligning rocker arm, not all late
> model heads really require them. My cast iron truck heads have a slot in the
> cast iron, as opposed to a large hole. I DO need the narrow body ( center bolt
> valve covers). For some reason Northern Auto Parts carries these at a lot less
> ($240 vs $300) than the self aligning type & if you moved up to a performance
> head that used guide plates you still have the right type of rocker arm.
I've noticed that difference. I am going to use a set of Vortec heads, and these
require self aligning type arms. The difference between screw in studs, guide
plates, + time spent and self aligning arms isn't worth the extra work at this
point. Maybe later...
Shannen
More information about the Diy_efi
mailing list