Thermal Sensor

[xxalexx at ix.netcom.com]

> Date:          Thu, 16 Jul 1998 15:41:08 +0100
> From:          "Andrew W. Macfadyen" <am018 at post.almac.co.uk>
> To:            diy_efi at efi332.eng.ohio-state.edu
> Subject:       Re: Thermal Sensor
> Reply-to:      diy_efi at efi332.eng.ohio-state.edu

> In this sort of temperature range you really need a thermo-couple type
> sensor  --- such as the ones sold for digital multi meters.
> 
If they are carbon composite rotors, the TC would be out of range,
you would need IR in 2K-4K C range.
You could mount a TC within  1/16'' of rotor and get a reading.
Much simpler than setting up IR, at least 10 yrs ago they were
many times a pain.
alex
> Robert Harris wrote:
> 
> > I am looking for a non contact thermal sensor to "look" at the brakes on
cut