Holden BCC BKCZ

[Shannen Durphey]

Justin Albury wrote:
> 
<snip>
> The 1227808 does not have high speed, bi-directional serial data
> capability, unless the RT2.00 is installed. It is functionally the same
> computer
> as the later 16183082, but it is missing a UART (serial chip). It can
> only transmit low speed data via the check engine light circuit. This
> does not
> imply that it is in any way slower than later ECMs. When the RT2.00 is
> installed, it is functionally the same as the 16183082, but is much
> cheaper and easily obtainable.
> 
> Note that the same ECM can be used on 4, 6 or 8 cylinder engines. The
> differences are contained within the memcal.
> 
> well i hope this helps you a little more
> 
> Juz!

So, developement could be done with a 16183082, and when
calibration is complete the ECM could be swapped for the 808,
with the newer ECM retained for developement in the next project?
Shannen