Australian CDI kits READ THIS

[Mike Ayres]

Does any one know of a state side CDI kits? 
I have a twin cylinder motorcycle with twin ignition I need to replace the
transistor switching system with a true 300 - 400 volt CDI.
I would like to have electronic spark advance and tac output.

THANKS

----------
> From: Darryn Watson <db at vianet.net.au>
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: Re: Australian CDI kits READ THIS
> Date: Tuesday, June 02, 1998 5:07 AM
> 
> On Tue, 2 Jun 1998 17:52:42 +1000 , you wrote:
> 
> >Hi all,
> >
> >There is no CDI kit in the June 98 edition of Silicon Chip. There is
> >however a rehash of the high energy electronic ignition system
> >originally from May 88 that uses the MC3334P chip and switches via an
> >MJH10012 transistor. The new design allows you to put a trigger in from
> >dual points, hall effect or reluctor and also has a tach signal.
> >
> >I have the article at work if anyone wants further info.
> SORRY !!!!!!!!!!!!!
> 
> After reading the June 98 SC and looking closer at the ad its not the
> same kit  OOPS
> 
> If the numbers are above 10 for the CDI I could still get a better
> price if anyone is interested
> 
> Its only about $10 less for 1-9 units wholesale
> 
> Darryn
> 
> BTW 
> With the CDI I had trouble getting it to work with my VDO Tacho.  I
> needed the extra little circuit as shown in the circuit diagrams