Coils for Ion

[H. J. Zivnak]

-----Original Message-----
From: Jim Davies <jimd at vcc.bc.ca>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Tuesday, June 02, 1998 12:01 PM
Subject: Re: Coils for Ion


>
>
>On Tue, 2 Jun 1998, H. J. Zivnak wrote:
>
>>
>> Went to the local autoparts, Fluked a Borg Warner E 42 P and the
resistance
>> between the red and yellow wires of the primary is 1.2 ohms and the
>> resistance between that black wire and the HT terminal is 8.41k.
>>
>> This coil is open frame and has 3 wires (red, yellow, black) coming out
of
>
>FWIW, I just rechecked the new, remote mount version of this coil, PN
>1115315 etc etc and get the same readings. All primary connectors read
>low ohms between them and there is about 8.5K between primary and
>secondary terminals
>
This coil is open between the primary and secondary.  I thot we were looking
for a coil with an isolated secondary.

Joe