Bench racing ecms Even if ya hate 101 please read

[kenkelly at lucent.com]

Bruce,
	the 94 to 97 LT1 PCM's have four connectors, not three. They are color coded
white, blue, red, and black. Each is a 2 by 16 array of pins on 1/8th inch
centers. looks like a computer floppy or IDE ribbon cable connector except
slightly larger pin spacing. Each color connector has a different key position.

	For the VSS be advised that P4 use 30 Hz and 94 & up uses 50Hz.

		Ken

Bruce Plecan wrote:
CLIP
 
> I need a set of ecm connectors also, unless they are the
> same as a 730 (three. one yellow two black).  Also on the flash a
> v-8 version, please.
>   I have the two+three ecm style connectors
> A 50% dwell frequency generator for VSS,  hopefully this will work,
>     and not have to bother with Buffer/amp, or DRAC..
> Cheers
> Bruce
> 
> How hard would it be to come up with a Laptop program for an actual
> run/recording of vehicle?.  Then run some opto-isolators for triggering
> rpm/vss/map/maf/iat/coolant temps for the bench stuff?.  Actually
> would someone volunteer for doing this.....