Trigger disc orientation help.

[AL8001 at aol.com]

In a message dated 98-06-16 14:28:34 EDT, chris at maximum-bhp.u-net.com writes:

>.I expected it to be pinned or 
>keyed,when I undid the front pulley bolt,but it wasn't ...:-( The 
>disc is free to rotate.There is no distributor trigger,or cam 
>trigger.I faxed Italy,and received the reply that :
>
>"At TDC on 1 or 4 ,one prong of the disc should be central to the 
>crank pickup sender".

EZ fix.

Take a close look at the wheel and area that the center of the wheel touches.
There will be some sort of impression from the bolted parts. Just match up the
lines, scrapes and marks!