700R4 bptest

[Brian Hartman]

I want to thanx for the help on upgrading the older 700r4's.  I have the books
and know what to do but some of the post are helping narrow it down.  ALL of the
performance mods that people are listing are in my manual but the older to newer
upgrades is what I'm working on.  I will make it available on FTP soon so you
all can use it.  Thanx for the help.  I'll be done soon,

Brian

owner-diy_efi at efi332.eng.ohio-state.edu wrote:

> change the front & rear sprags to new design. make sure that you have a 10
> vane pump. fairbanks billet 2-4 servo is nice too. corvette stock converter
> has 2000 rpm stall. nice for the street.
>
> mike
>  ----------
> From: Brian Hartman
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: Re: 700R4   bptest
> Date: Sat, Jun 27, 1998 5:51PM
>
> You might want to get a VB spring kit from Fairbanks to make sure your Valve
> Body is up to snuff.  Remember to take your Pump to a tranny shop and have
> the
> 9/32" hole drilled throughout the oil return to aleviate pressure behind the
> pump seal.  If you need help when you are in the middle of it just ask.  If