GM efi fuel tank fittings

[Shannen Durphey]

Andris Skulte wrote:

>

<snip>

> Earl's has fittings that
> adapt the M16x1.5 and M14x1.5 to -6AN, w/o anything else. These were
> originally for the power steering pumps.
>
>  If I'm limited to the -6AN adapters on both ends of the fuel system,
> what is the point of upgrading to braided line first of all, and going
> to -8 or -10? It seems like the -6 adapters are the weak link, and I
> wouldn't gain anything from going anything larger than 3/8" dia (same as
> -6)
>
> Andris

  Have you looked into purchasing unmachined fuel rails?  If you need, I can
dig around and find some sources.  I'm pretty sure I saw some of that stuff in
an Accell catalogue.

Shannen