Ignition timing for Holley Pro-Jection 4Di

[Joe Boucher]

Go to the FTP site at: ftp://efi332.eng.ohio-state.edu/incoming.

Pull down the files 7pingmgif.txt and 7pingmgif.zip.

There is a wiring diagram for the 7 pi module in the gif file.

Joe Boucher
'70 RS/SS Camaro  '81 TBI Suburban

Raymond C Drouillard wrote:

> My Jeep Grand Wagoneer has an AMC 360 engine with Ford Duraspark
> ignition.  I don't want to try to get a Ford non-signature TFI
> distributer to fit the engine.
>
> Does anyone have any information on the signals input/output on the Ford
> non-signature TFI distributer or the GM 7-Wire distributer?
>
> Can the Ford TFI module or the GM 7-wire module be hooked to the relucter
> in my existing Ford Duraspark ignition.
>
> Does anyone have any information on the inputs/outputs of the distributer
> connecter of the Holley Pro-Jection 4Di wiring harness?
>
> What kind of spark control signal is output by the Holley ECU?  Does it
> actually send out pulses that are intended to trigger the ignition, or
> does it send out a signal that instructs the ignition where to set the
> timing?
>
> If you have any graphics files (wiring diagrams or whatever), please send
> them to ray at sslinfo.com (My Juno account can't receive image files).
>
> Ray Drouillard
>
> _____________________________________________________________________
> You don't need to buy Internet access to use free Internet e-mail.
> Get completely free e-mail from Juno at http://www.juno.com
> Or call Juno at (800) 654-JUNO [654-5866]