Need more fuel

John Hess johnhess at cris.com
Mon Mar 23 17:43:29 GMT 1998


If you put a screw on the top, it will not leak, as all the sealing is at
the bottom of the unit (under the spring).

At 09:59 PM 3/22/98 -0800, dzorde wrote:
>Yes,
>I remember someone mentioning drilling a hole in the top, welding on a nut
>and putting in a screw to make it adjustable.  My question is, doesn't the
>unit have to be air tight, hence there will be a leak if you put in a screw ?
>
>I guess if you go for the shim the regulator will stay air tight but you
>need a bit of trial and error to get it right since you don't know how much
>is needed to increase pressure 5psi (for example).
>
>Dan     dzorde at geocities.com
>
>>Your options
>>
>>Buy ford motorsport 24 LB injectors
>>Quite a good buy in US or Kanada
>>
>>Increase fuel pressure
>>
>>by putting shim behind spring in regulator
>>You will need a safety torx to do this
>>
>>and a lot of patience
>>
>>Or add a hot rod adjustable reg.
>>like tpis ect.
>>
>>later:peter
>>
>
>
>



More information about the Diy_efi mailing list