Need more fuel

[Jennifer Rose]

At 09:59 PM 3/22/98 -0800, you wrote:
Hi Dan

	Yes -it should be fairly tight. On mine use some thread sealant on the
bolt, figured minor leak was ok. Look close at the speed catalog - the big
guys just use billet aluminum for the cap. Still has a bolt sticking out of
it.

Vance

>Vance,
>
>That's right I remember you mentioning this before.  Doesn't the regulator
>have to stay air tight for the vacuum compensation to work on the regulator ?
>
>Dan     dzorde at geocities.com
> 
>>>Hi Dan
>>
>>	If you have a spare cap to the stock pressure regulator - it is possible
>>to drill a hole and braze a 1/4 " 28 or metric eqv. nut to cap. fabricate a
>>round slug for top of spring. This way you can make your own adjustable
>>reg. The tpi cap is screwed to reg body and disassembles easily
>>
>>Vance 
>>
>
>