Junkyard shopping

[Paul Tholey]

Shannen,

        Can a 3rd party enter this?  What are 7730 ECM's worth to you?  I
have a local U-Pull-It yard and I would gladly pull stuff for people.  The
ECM's are cake to pull, but a harness takes me at least 3 hours to pull
right.  I am sure there are people faster than me, but that is not the issue.
        This goes out to the rest of the list too.  School is ending, only
for 1 month, finally will be graduating after summer classes :^)  So if I
can spend my days in the yard pulling stuff for people, and keeping an eye
on all of the "fresh kills", this really would be a great summer vacation!

Paul Tholey

At 09:47 PM 5/3/98 -0600, you wrote:
>David wrote:
>> 
>> Your prices seem high.
>> 
>> The local pick it yourself charges $ 25.00 for the ECU and $ 5.00 to 10.00
>> for the harness depending who is collecting money that day.
>> 
>> David
>> 
>> -----Original Message-----
>> From: Shannen Durphey <shannen at mcn.net>
>> To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
>> Date: Friday, May 01, 1998 2:07 AM
>> Subject: Re: 101 Stuff
>> 
>> |Bruce Plecan wrote:
>> |>
>> |> We here at CSH., HQ., are experiencing a technical problem.
>> |> While slightly off list, the edge is blurring here between personal
>> |> and 101 projects.  Anyway, we need a couple things.  1. a set
>> |> of ecm connectors like used on the 747's (it used two connectors),
>> |> 2. a set off a 730 type ecm (it had three connectors), with like a
>> |> foot (preferably more) of wire on them for doing some bench work.
>> |> 3. Then a entire harness outta like a 90-91 2.8 Celebrity, or any other
>> |> 1227730 ecm equipped car.  Not looking for freebies, just resonable
>> |> priced ones.
>> |> Nor a worry mate.
>> |> Bruce
>> |
>> |
>> |What's reasonable?  Local bone yard sells harnesses for $50,
>> |and ECM for $50.  Can maybe get both for $75, but seems high
>> |to me.  If interested, I'll make some calls.
>> |
>> |Shannen
>> |
>I'll call you on that.  When you have a harness and ECM from
>86-91 chev pickup (1227747 ecm) let me know.  I'm sure
>there's a deal in there.
>
>Or, when you have the harness and ECM from 2.8l 1227730 car,
>the same applies.  
>
>Shannen
>
>