Misc 101 Information
jdzura at csc.com
jdzura at csc.com
Mon May 4 17:08:46 GMT 1998
I have been following the posts with interest, but the one thing I have not seen
is what processor is run in the thing?
Joe
nacelp at bright.net on 05/04/98 12:01:33 PM
Please respond to diy_efi at efi332.eng.ohio-state.edu
To: diy_efi at efi332.eng.ohio-state.edu
cc: (bcc: Joe Dzura/SED/CSC)
Subject: Misc 101 Information
In case you were ever curious, how often the ecm "looks" at
things.
The ECM never stops polling the sensors. Under certain conditions, it might
ignore a measured value though. Here's how often the XYZ
ecm samples the inputs:
MAP is sampled 160 times a second.
O2 is sampled 160 times a second.
VSS (MPH) is sampled every VSS pulse (up to 80 times a second.)
RPM is computed 80 times a second (in the spark code.)
TPS is sampled 80 times a second.
Battery voltage is sampled 10 times a second.
CTS is sampled 10 times a second.
ALDL is sampled 10 times a second.
MAT is sampled 10 times a second.
MPH is computed 10 times a second.
Fuel and spark are computed 80 times a second - on alternate 160 Hz beats
Most of these sampled items are filtered, so the value used for
further computations won't change as fast as the sample rate
Cheers
Bruce
More information about the Diy_efi
mailing list