Ford V8 efi

[Clare Snyder]

Clive Apps Techno-Logicals 416 510 0020 wrote:
> 
> >
> > > Again, I would use the 5 litre HO setup for injection, possibly using a GM
> > > brain and aftermarket style turbo - could even use a pair of 2.5 liter
> > > Chrysler turbos, one on each bank, connected to a common intake and
> > > plenum. The 5 litre system would be sized pretty close to correct for a
> > > slightly warmed 289, or 4.8 Litre engine. --
> >
> > how does a ford 5.0L HO EFI system know anything about veriable pressure
> > or the GM brain your refering to?
> >
> > as for Crysler turbos Uck. I'll go with a pair of Garrett's.
> > I dont want the car to hit boost at all during normal street driving. hence being
> > very relable and fuel efficiant unless i punch it.
> 
> they would be too small anyways
> stock they cna only supply enough air to make approx 150-200 HP each
> 
> Clive
And you are going to get 400 HP out of your street driven 289? Ya, I;ll
bet!! If you would resd the post, the intent was to use one turbo per
bank.
-- 
                               _/\_
                       --|-----([])-----|--
                         S    0/  \0    B
         Alls well that ends well!! www.snyder.on.ca is back
                  E-Mail service is back to normal
                  To avoid bouncing E-Mail messages
                    Reply to Clare at snyder.on.ca
                                OR
Remove the R from clsnyder in my E-Mail Address to reply. Stop the
spammers!!!
It's hard to soar like an eagle when your stuck with a bunch of
Turkeys!!!