1227747 pinout
Kevin Vannorsdel
kv at us.ibm.com
Tue May 26 20:18:27 GMT 1998
...from a previous post by Bruce...
________________________________________________
Kevin Vannorsdel IBM Arm Electronics Development
408-256-6492 Tie 276-6492 kv at us.ibm.com
---------------------- Forwarded by Kevin Vannorsdel/San Jose/IBM on 05/26/98
01:13 PM ---------------------------
owner-diy_efi at efi332.eng.ohio-state.edu on 04/18/98 07:58:25 AM
Please respond to diy_efi at efi332.eng.ohio-state.edu
To: diy_efi at efi332.eng.ohio-state.edu
cc:
Subject: 1227747 pinout
For those of you working on the bench 747 part of the Prog 101,
or those of your swapping to one here is a pinout.
The * means optional, or emission related
A1 drk grn/wht Fuel pump relay
A2 Brn Air Port*
A3 Grn/Yel Canister Purge*
A4 Gray EGR*
A5 brn/wht SES Light
A6 pnk/blk Ign power
A7 Tan/Blk MT/Shift, or TCC*
A8 orgn Serial Data
A9 Wht/Blk Diagnostic Test
A10 brn VSS
A11 blk/Pnk MAP Grnd
A12 Blk/Wht ECM Grnd
B1 orgn Battery
B2 Tan/Wht fuel pump input
B3 blk/red Dist ref low
B5 ppl/wht Distr ref pulse
B7 blk EST Retard
B8 Grn A/C Signal*
B10 org/blk P/N Switch
C3-6 blu/grn's IAC
C8 Drk Grn 4th gear switch*
C9 ppl/wht Crank
C10 yel Coolant temp
C11 lt grn Map
C13 Drk Blu TPS
C14 gry 5v ref (sensors)
C16 orng battery
D1+2 blk grounds
D4 wht Spark timing out
D5 tan/blk Ign mod bypass
D6 tan Ox ref low
D7 ppl Ox sesnor high
D15+16 Injector
D14+C15 Injector
If anyone finds an error please yell right away (other than
spelling).
Bruce
More information about the Diy_efi
mailing list