HEI Coil Wires

[The Thibodeaus]

I spoke with Crane Electronics tonight, the answer I got was that the plugs
on the end of the wires are slightly different.  The coils (red & white
wires, red & yellow wires) are the same.

Bob T

At 12:29 PM 11/6/98 EST, you wrote:
>In a message dated 98-11-06 11:33:16 EST, you write:
>
><< s far as I know, the 2 coils are different.  I think the reason is the
> control module in the bottom of the distributor.  One coil is for the older
> module w/only 4 wires on it, the other for the newer, 6 wire module.  Maybe
> one might draw too much current on the primary side and toast the module?
>  >>
> the coil draw no current. it produces a sine wave.
>if I find 
>