GM 4 Cylinder Engines

[Pete Datcuk]

  The Quad-4 in its base version was 150hp, then 160hp, and HO version was
180. Displacement was 2.4l. 16v DOHC.  They were redesigned '95/'96 area,
added balance shafts, stroked and debored it, cut displacement to 2.3l and
derated them back down to 150hp.  Also cut the rev limit by a few hundred
RPM.

Pete Datcuk
Mechanical Engineer
Sewell, NJ
'87 Fiero, some day to be Northstar'ed :-)
Quite a few credits away from that cone shaped hat....

> -----Original Message-----
> From: owner-diy_efi at efi332.eng.ohio-state.edu
> [mailto:owner-diy_efi at efi332.eng.ohio-state.edu]On Behalf Of
> martin at mgass.demon.co.uk
> Sent: Sunday, November 08, 1998 3:25 PM
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: GM 4 Cylinder Engines
>
>
> Anybody know if GM does a 16V DOHC
> 4 Cylinder Engine with EFI of less
> than 2500cc in the US for Vehicles
> made after 1994 ?
>
> regards,
>
> Martin
> ----------------------------------------------------------
> martin at mgass.demon.co.uk
> ----------------------------------------------------------
>