Fuel pressure / Flow rate formula
Frank F Parker
fparker at umich.edu
Fri Nov 13 03:04:07 GMT 1998
>
> The first is from an MSD fuel management catalog/brochure I have. It
> states that
>
>
> F2 = sqrt(P2 / P1) * F1
>
>
> For me, I have a 20 lb injector at 40 psi and I want to check the flow
> at a maximum of 70 psi, so
>
> F2 = sqrt(70 / 40) * 20 = 26.4 lbs/hr
>
This is the correct one. Flow does vary with the sq root of pressure
ratio. Believe it- I verified it on the bench at pressures ranging from
30 to 90 psi.
regards,
frank parker
More information about the Diy_efi
mailing list