setting ignition curves without dyno

[Clarence L.Snyder]

I said:
> Put a strain gauge on the driveshaft. You might need to cuctom make a
> shaft with a torsion bar in it. If so, put in an inductive device to
> charge the battery for the transducer as well, and a centifugal switch

Found the reference to the telemetry device.
www.radiometrix.co.uk
Apparently the transmitter/receiver pair is less than $100.
Also try a search on accumetrix, or accumetrics.
I believe they run on 3 volts so an inductive charger for driveshaft
mounted batteries shouldn't be too much of a stretch.