Injectors and resistors (and i'm back)

[David A. Cooley]

At 06:31 PM 11/23/98 -0500, you wrote:
>hello !!
>	i think i have a suggestion here,would it be possible and/or doable
>to use the injector driver from the 808 to drive a relay which send the exact
>amount of current to the injector (which could be took from another current
>source) ??
>


The problem with a relay is it's a mechanical device... There is a delay
from the time you tell it to turn on until it turns on, there could be
contact "bounce" etc... Best bet is to use another injector driver or make
your own from a Power MOSFET.

Later,
DAve


===========================================================
           David Cooley N5XMT           Internet: N5XMT at bellsouth.net
     Packet: N5XMT at KQ4LO.#INT.NC.USA.NA   T.A.P.R. Member #7068
       I am Pentium of Borg...division is futile...you will be approximated.
===========================================================