Injectors and resistors (and i'm back)

[Walter Sherwin]

Just a thought starter..................Accel have a new product called
"VIC" which is short for Variable Injector Controller.  Basically, it has
two input channels which can in turn trigger four 1A/4A  peak&hold channels
each.  Also, each channel has a gross pulse width adjustment knob, which can
facilitate individual cylinder trim, even in bank fire mode!  This could be
a simple "plug-n-play" solution to the game of matching unintended
controllers and injectors.  However, it won't work with sequential
injection.


-----Original Message-----
From: Alain Toussaint <alaint at cgocable.ca>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Monday, November 23, 1998 4:51 PM
Subject: Re: Injectors and resistors (and i'm back)


>hello !!
> i think i have a suggestion here,would it be possible and/or doable
>to use the injector driver from the 808 to drive a relay which send the
exact
>amount of current to the injector (which could be took from another current
>source) ??
>
>Alain Toussaint