Injectors and resistors (and i'm back)
Alain Toussaint
alaint at cgocable.ca
Tue Nov 24 18:16:40 GMT 1998
Gregory A. Parmer wrote:
>
> > What about EMI when you shut off the inductive load... use the body diode of
> > the FET to catch the spike?... if so what voltage? How about an RC snubber
> > across the injector... or is EMI not a problem (maybe inductance is low?)
>
> Check out the schematics for using the Nat'l Semi LM1949 Inj Driver
> Cntrlr. It's a PDF file available from www.nsc.com. It uses a 50V zener,
> AIR..this for driving the std 4-1 peak and hold injector..ala GM TBI.
>
> -greg
will look for it,BTW,the thing that helped me make this suggestion was some
pages
on a MBZ website showing how to send more juice to the headlight,it did so by
taking the wiring that goes to the headlight,run them to a relay,then the relay
control an external source of juice (with big wire and fuses),that send a lot
more juice to the headlight,needless to say,it's a very popular mod to those
benz driver who regularly see life in triple digit !!!
Alain Toussaint
More information about the Diy_efi
mailing list