Injector control

[Greg Hermann]

>-----Original Message-----
>From: Greg Hermann <bearbvd at sni.net>
>
>
><big snip>
>
>>>By the way, what would you call good enough resolution?.
>>>Bruce
>>
>>To do a really good job of getting an idle JUST RIGHT-- my WAG (but a
>>fairly well educated one) would be that you want to be able to adjust the
>>amount of fuel delivered at idle in no more than 1% increments, I would be
>>happier with 1/3% adjustment capability. This is based on considering that
>>a 1% change in fuel delivered equates to about a 0.14 change in a/f ratio
>>and a 1/3% change would equate to a 0.05 adjustment to a/f ratio.
>>>>
>
>For what kind of application are you looking at?.
>Bruce
>
>>>>Regards, Greg
>>>>
You name it--if it is mine, I kinda like it to run right, smooth, and come
off of idle RIGHT NOW!! With my hot Alfa, used to be able to floor it at
idle, and then remove foot as fast as leg would move, and could watch tach
go to about 5,000--and this was a good, mechanical tach, no bounce.>>>>
>>
>>