Syclone question????

[Bruce Plecan]

-----Original Message-----
From: Stuart Bunning <stuart at kenelec.com.au>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Friday, November 27, 1998 3:51 AM
Subject: Re: Syclone question????


>While we were talking Syclone Bin's what ECU does it use 122????  I put a
>bin i think AYBM4053 I got from one of the syclone guyes in my 808 and it
>worked fine (on the bench led flashing etc).

1227749, Has two P+H drivers in it..........  Used in one USA application to
drive 4 P+H injectors.
If your curious about the chip at www.syty.org there is more info.,
and a chip editor for that series of bins..
Bruce

>
>
>
>At 02:59 AM 25/11/98 EST, you wrote:
>>Hi everyone,
>
>>I noticed the syclone only goes to 200 kpa.....have any of you guys
rescaled
>>this for 3 bar????????(like 15 lbs of boost isn't enough)...and if so what
>>kind of problems will I see with the baro resets?????
>>-Carl Summers
>>
>
>
>Best Regards,
>
>STUART BUNNING
>SALES ENGINEER
>KENELEC PTY LTD
>
>23-25 REDLAND DRIVE
>MITCHAM VICTORIA 3132
>AUSTRALIA
>
>PHONE:  61 3 9873 1022
>FAX:    61 3 9873 0200
>EMAIL:  stuart at kenelec.com.au
>WEB:    http://www.kenelec.com.au/
>