02 Sensor burnt

[David A. Cooley]

Maybe one bad injector making one cylinder run extremely lean (High EGT's)
but the O2 sensor shows it ok as the rest are richened to overcome the
average leanness.

At 07:19 AM 11/28/98 +1100, you wrote:
>Read this in another list
><snip>
>The oxygen sensor had a hole burned through it
>right down the middle. Curiously enough, it still
>functioned but way out of range. Replacement cured the
>problem. Now, 10 months later, the exact same symptom and
>same hole is burned through the 02. Replaced again and all
>is well. What is going on?
>Any thoughts?
>Cheers
>Geoff
>

===========================================================
           David Cooley N5XMT           Internet: N5XMT at bellsouth.net
     Packet: N5XMT at KQ4LO.#INT.NC.USA.NA   T.A.P.R. Member #7068
       I am Pentium of Borg...division is futile...you will be approximated.
===========================================================