Sunbird ECM wiring diagram
Richard Wakeling
kojab at ar.com.au
Thu Oct 1 23:40:26 GMT 1998
BossOz at aol.com wrote:
>
> In a message dated 98-10-01 07:17:46 EDT, you write:
>
> << I am especially interested in the connections
> of the injectors to the ECM and if a jumper ground circuit is used. >>
> This what the injector circut looks like
>
> ignition switch ----ecm/ign
> fuse---------------------------------------------------pnk/blk 439 ba6
> to ecm/ign
> fuse------injector1&2---------------------------- dk blu467 bc11
> to ecm/ign
> fuse------injector3&4---------------------------- lt grn 468 bc10
> circut 439 ignition feed to injectors and ecm
> 467 & 468 injector drivers
Thanks Mark,
Can you tell me if there is a jumper between bc13 and bd7 to ground.
Cheers Richard.
More information about the Diy_efi
mailing list