Programming 101, NOT

[Bruce Plecan]

-----Original Message-----
From: Roger Heflin <rah at horizon.hit.net>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Wednesday, October 14, 1998 9:43 PM
Subject: Re: Programming 101, NOT


BL/INT limits, probably have alot to due with the flow characteristics
of the injectors, and what gm considers normal wear and tear.
The oem injectors seem to be rather larger than needed, so with
a min change to BL/INT would handle any normal wear.  So when
the limits were reached it would be easy to have a yes/no for a 
failure response.  Like the IAC, there is probably alot to this that
isn't apparent to the none code readers.
Cheers
Bruce