Starting a ECM application reference page

[ECMnut at aol.com]

In a message dated 10/19/98 2:16:01 PM Eastern Daylight Time,
steve.ravet at arm.com writes:

>  There's an OEM section on the DIYEFI page, with a section on GM
>  underneath it.  That's where the 101 project is, Bruce's tuning tips,
>  etc.  Makes sense, to me, to have everything collected there.  I'm going
>  thru the archives as I get the chance and pulling good info out to put
>  on the WWW pages.
Sounds good... lemme try to develop it a little with the help of 
the list members, then I'll send it over to you...
LIST MEMBERS...
   IF YOU HAVE GM ECM APP INFO TO SHARE;
please go to     www.enzoco.com/mike/gmecm
and help fill in the gaps in the info provided there..
Your input will help build a permanent reference we can share.
TIA
Mike V