duty-cycle monitor
Bruce Plecan
nacelp at bright.net
Wed Oct 21 13:10:37 GMT 1998
-----Original Message-----
From: West, David <djwest at subcorp.com.au>
To: 'diy_efi at efi332.eng.ohio-state.edu' <diy_efi at efi332.eng.ohio-state.edu>
Date: Wednesday, October 21, 1998 2:37 AM
Subject: RE: duty-cycle monitor
Another please post
Bruce
>Yes,
>Please post
>Reg
>D West
>-----Original Message-----
>From: Georg Lerm [SMTP:georg at redxch.wcape.gov.za]
>Sent: Wednesday, 21 October 1998 15:33
>To: diy_efi at efi332.eng.ohio-state.edu
>Subject: Re: duty-cycle monitor
>Hi
>Might be a little off the topic.
>I made a pulse width measurement instrument to measure pulse width.
>0 to 65ms with 0.1 ms resolution. Uses a micro and a 2line LCD
>display and some other bits.
>Will post the info if some interest is shown.
>Georg
>So back to the original topic... Does anyone know of an inexpensive and
>somewhat generic way to monitor duty-cycle? I'm thinking of injectors
>here.
>thanx, MK
More information about the Diy_efi
mailing list