Haltech F3 issues

[Richard Wakeling]

Hi Eddie,
	I have got software version 5.2 and some where a owners manual.
I will try and find it and give you some info.
Cheers Richard.

Eddie Pylant wrote:
> 
> I can understand the MAT & CTS only have one pin out,  since the other wire
> is a ground, but I would think that the TPS would have at least two wires
> from the ECU - one being the reference voltage wire (my Delco ECU used a 5V
> reference). This does help, though- thanks!
> 
> >The only pin labled as TPS is #9, which is the the ninth pin from the
> >lefthand side, top row. The MAT is #7, and CTS #10.
> 
> I've got software revision 4.94; if you'd like it, email me at
> epylant at mail.utexas.edu and I'll send it your way.
> 
> >problem with the 10 year old software. I spoke to Haltec about it and they
> >are willing to sell me some new software for $50 or whatever, but they're
> >not sure if it'll even work with the ancient F3. I have version 3P1 FWIW.
> >
> >Can anyone help me out?
> >
> >Thanks.
> >
> >
> >Matt Beaubien
> >mbeaubie at ualberta.ca
> >