BBC AKSN

[Jason Weir]

David A. Cooley wrote:

> At 05:07 PM 10/24/98 -0400, you wrote:
> >I just got aksn.bin off of the FTP site and I thought that I would
> play
> >around with it a little.. First of all its off of a 88 4.3 V6 5 spd..
>
> >Well when I run it, it starts just fine, idles real smooth but as
> soon
> >as it goes into closed loop it stalls,  Well I increased the idle in
> the
> >chip to 900 across the board now it will idle but it oscillates
> between
> >1100 to 700.  Looking at the injector patterns, the injectors are
> >turning off completely, then the rpm drops they start pulsing again
> and
> >the rpm climbs to 1100 again and they stop completely again... This
> is
> >the only chip that has caused this to happen.. Anybody have any ideas
>
> >what is causing this?....  Thanks   Jason
>
> What engine/vehicle did you put it in?
> The IAC may be different and asking for more steps to make the same
> adjustment yours can do in fewer steps...

88 Jeep Wrangler / 4.2 I6  but the TBI is off of a 91 4.3 so that might
be the problem...I am gonna play around some more but thanks for the
thoughts.....--
Jason Weir
88 Wrangler - 258 Chevy TBI
Fayetteville, North Carolina
http://home.att.net/~jweir  --- Jeep Home Page
mailto:jweir at att.net