Toyota Supra twin turbo and water injection.

[Bruce Plecan]

-----Original Message-----
From: ECMnut at aol.com <ECMnut at aol.com>
To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
Date: Friday, April 02, 1999 10:37 PM
Subject: Re: Toyota Supra twin turbo and water injection.

Yikes, now ya got me thinking.  I've done it pre cooler, but none of the
stuff has had a clear enough shot to see into the cooler's core.  Have you
seen this happen?.
Being steam can one of the chemical types say what we might expect?.
Simple answer would be distilled water, I quess.
Bruce


>> Having twin,sequential turbos suggests I inject water *after*
>>  the intercooler,maybe just in front of the throttle body? Or should I
>>  be injecting elsewhere?
>Hi Chris,
>Sounds like the right place.  You don't want to crud-up the
>inside of the IC core.  They are not intended to be hosed
>with water.   The crud that tap water causes to form on
>aluminum will reduce the thermal efficiency of the IC also.
>After the IC, but before the TB is a good location.
>GL
>Mike V