high pressure fuel pumps - recommendations?

[Bruce Plecan]

----- Original Message ----- 
From: Martin Easterbrook <martin_easterbrook at yahoo.co.uk>
To: <diy_efi at efi332.eng.ohio-state.edu>
Sent: Monday, April 12, 1999 11:51 AM
Subject: high pressure fuel pumps - recommendations?

What style/manufacturer are these?.
Bruce


> I have some injectors designed for use at 16barg (230psi).  I have
> measured them against other race injectors at 10bar (145psi), 16bar
> (230psi) and 30bar (435psi) on my test bed and found that the
> atomisation performance and linearity are very good at 16 bar and
> excellent at 30bar.
> 
> I would like to run these on a car, but I need to find a suitable fuel
> pump setup.  I need either a mechanical pump or a combination of
> electic pumps that can supply 98 octane pump fuel for 600hp at 16bar
> or 30 bar (ideally).  The pump(s) would be fed from a pressurised
> pre-tank (running about 1barg).
> 
> Any recommendations?
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
>