GM '86 2.8 Fuel Injected prom re-programming/replacing

[Bruce Plecan]

----- Original Message ----- 
From: James P Hunt <war_machine1 at juno.com>
To: <diy_efi at efi332.eng.ohio-state.edu>
Sent: Friday, April 16, 1999 7:25 PM
Subject: GM '86 2.8 Fuel Injected prom re-programming/replacing

MAP 2 Bar, oem gm 1227749.  4-6 cylinder applications.
Second choice IMHO Haltech E6GM ($700 USA).
Also, Canadian outfit SDS.
Bruce


> As I stated in a previous post, I have an '85 Fiero, that I am planning
> to turbocharge, but I failed to mention that the ECM, wiring, etc. is
> from an '86 Fiero. 
> 
> I realized this after the last time I took my interior apart and noticed
> a late-model style ECM.
> 
> So now my question is as follows, does anyone know where I can find a
> prom file, or info on programming a replacement prom for the ECM,
> preferably to use in conjunction with a 2-bar MAP sensor.
> 
> TIA
> James H.
> Valrico, FL
> war_machine1 at juno.com
> '82 Honda CB650
> '85 Fiero 2m6 SC
> 
> ___________________________________________________________________
> You don't need to buy Internet access to use free Internet e-mail.
> Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
> or call Juno at (800) 654-JUNO [654-5866]
>