Which Intake

[Chris G. Lucas]

> I've looked at the GM TPI system, but since it was designed for a 305
> ci, and runs out of breathing by 4500 RPM on a stock 305/350 small
> block, I figure it's way too small for 434ci.  I've also considered
> something like the Lingenfelter(sp)and the Accel TPI systems.  Most of
> these are suppose to be good for 5,800 RPM on a 350 SBC, and I wonder if
> they are big enough.  Are the bigger volumes in the after market systems
> enough to feed a 434 engine in the low RPM range with the turbos pushing
> enough air through the TPI system to run the engine up to 6,500 RPM?
>
> Is there another system out there that I should consider?
>
> Thanks for your help.

Not that I know a dang thing about twin turbos, but I did run across a web
site, (probably one everyone has already seen).  That has a twin turbo 305
and tpi.  He has done alot of research and could probably give some ideas.
 http://www.skulte.com/turbo.html

Chris Lucas