Which Intake
Shannen Durphey
shannen at grolen.com
Mon Apr 19 00:50:18 GMT 1999
Chris G. Lucas wrote:
>
> > I've looked at the GM TPI system, but since it was designed for a 305
> > ci, and runs out of breathing by 4500 RPM on a stock 305/350 small
> > block, I figure it's way too small for 434ci. I've also considered
> > something like the Lingenfelter(sp)and the Accel TPI systems. Most of
> > these are suppose to be good for 5,800 RPM on a 350 SBC, and I wonder if
> > they are big enough. Are the bigger volumes in the after market systems
> > enough to feed a 434 engine in the low RPM range with the turbos pushing
> > enough air through the TPI system to run the engine up to 6,500 RPM?
> >
> > Is there another system out there that I should consider?
> >
> > Thanks for your help.
>
> Not that I know a dang thing about twin turbos, but I did run across a web
> site, (probably one everyone has already seen). That has a twin turbo 305
> and tpi. He has done alot of research and could probably give some ideas.
> http://www.skulte.com/turbo.html
>
> Chris Lucas
Mr. Skulte was a member of this list for a while. Search the archives
for his posts.
Shannen
More information about the Diy_efi
mailing list