Mail failure

[Msg Recipient]

TO: diy_efi                                                    DATE: 02/08/99
                                                               TIME: 10:07
SUBJECT: Mail failure
------------------------------------------------------------------------------

[008] Unable to deliver mail due to mailbag contention.
Message was not delivered to
  KOHLERNET/GENERATORS/NassJeff (KOHLERNET/GENERATORS/NassJeff)

------------------------------------------------------------------------------
   Date: 1999-02-08 10:10
   From: diy_efi [MCI:diy_efi \ EMS: INTERNET \ MBX:
diy_efi at efi332.eng.ohio-state.edu]
     CC: KOHLERNET/GENERATORS/NassJeff
     To: diy_efi [MCI:diy_efi \ EMS: INTERNET \ MBX:
diy_efi at efi332.eng.ohio-state.edu]
Subject:  Mail failure

---------------------------------------------------------------------------

MCI Mail date/time: Mon Feb 08, 1999 11:06 am  CDT
  Source date/time: Mon, 08 Feb 1999 11:06:00 -0500 (EST)
-------------------

TO: diy_efi                                                    DATE: 02/08/99
                                                               TIME: 09:57
SUBJECT: Mail failure
------------------------------------------------------------------------------

[008] Unable to deliver mail due to mailbag contention.
Message was not delivered to
  KOHLERNET/GENERATORS/NassJeff (KOHLERNET/GENERATORS/NassJeff)

------------------------------------------------------------------------------
   Date: 1999-02-08 09:58
   From: diy_efi [MCI:diy_efi \ EMS: INTERNET \ MBX:
diy_efi at efi332.eng.ohio-state.edu]
     CC: KOHLERNET/GENERATORS/NassJeff
     To: diy_efi [MCI:diy_efi \ EMS: INTERNET \ MBX:
diy_efi at efi332.eng.ohio-state.edu]
Subject:  Mail failure

---------------------------------------------------------------------------

MCI Mail date/time: Mon Feb 08, 1999 10:53 am  CDT
  Source date/time: Mon, 08 Feb 1999 10:51:55 -0500 (EST)
-------------------

TO: diy_efi                                                    DATE: 02-08-99
                                                               TIME: 09:33
SUBJECT: Mail failure
------------------------------------------------------------------------------

[008] Failure delivering user mail due to mailbag contention.
Mail item was not delivered to:
  KOHLERNET/GENERATORS/NassJeff

------------------------------------------------------------------------------
   Date: 1999-02-08 09:30
   From: diy_efi [MCI:diy_efi \ EMS: INTERNET \ MBX:
diy_efi at efi332.eng.ohio-state.edu]
     CC: KOHLERNET/GENERATORS/NassJeff
     To: diy_efi [MCI:diy_efi \ EMS: INTERNET \ MBX:
diy_efi at efi332.eng.ohio-state.edu]
Subject:  Re: Plugs for flare fittings?

---------------------------------------------------------------------------

MCI Mail date/time: Mon Feb 08, 1999  9:53 am  CDT
  Source date/time: Mon, 08 Feb 1999 09:51:10 -0500 (EST)
-------------------

In a message dated 2/5/1999 12:34:34 PM Eastern Standard Time,
steve.ravet at arm.com writes:

<< If I wanted to remove the AIR pump on my V8 S-10 conversion, then I'd
 have to find some flare plugs to plug the holes in the exhaust manifold
 where the AIR connects, right?  Any suggestions on where to find
 something like that?  I've called plumbing and A/C suppliers in my area
 and can't come up with anything.  A few places told me that if they had
 them, they'd only be in brass.  If I can find brass ones, would they
 work?  The manifold is cast iron and the AIR tubes are stainless.  Will
 brass take the heat cycling and temps? >>


Brass will work.  I have seen theese plugs at Trak Auto.  Also, a pipe plug
will work, I know, I've done it.

Bill K