Needed: 727 and 730 4 cylinder MEMCAL

[Tedscj at aol.com]

In a message dated 2/15/99 11:45:49 AM Eastern Standard Time, pford at qnx.com
writes:

<< is the wiring harness for these ecms seperate from the chasis harness
 ( if not where can one be found ) 
  >>

I don't know if you already know this but:
The harness connectors for the 727 and 730 are different.  If you get a 727
ECM then you need a 727 harness and the same goes for the 730.
Summit has new harnesses for 730's for about $280 I think, they're made by
Painless Wiring.

Your best bet is to find a U-Pull It type junkyard *somewhere* and get the
harness and computer from an '88 to '91 Grand Pix v6.  They are the 727 type.
Just get everything from the engine compartment (including the 727 ECM) and
separate the EFI from the rest at home.  And then you still have to find the
right Memcal of course.

Ted