Needed: 727 and 730 4 cylinder MEMCAL

[Don.F.Broadus at ucm.com]

I have a 730 from an 88 Buick that has the under hood type connectors 4
pins-rows deep and it is in a metal box that appears
to be waterproof, it was very tough to get open. It was mounted behind the
dash like regular ECM's   Also have regular 730's with 3 connectors like a
749.     Don

> -----Original Message-----
> From:	Tedscj at aol.com [SMTP:Tedscj at aol.com]
> Sent:	Monday, February 15, 1999 10:34 PM
> To:	diy_efi at efi332.eng.ohio-state.edu
> Subject:	Re: Needed: 727 and 730 4 cylinder MEMCAL
> 
> In a message dated 2/15/99 4:30:41 PM Eastern Standard Time,
> nacelp at bright.net
> writes:
> 
> << Oh, how so, meaning what is the difference in connectors
>  Bruce
>  
>  
>  >I don't know if you already know this but:
>  >The harness connectors for the 727 and 730 are different.  If you get a
> 727
>  >ECM then you need a 727 harness and the same goes for the 730.
>  >Ted
>  > >>
> 
> 
> I meant where they connect to the ECM, not where they connect to all the
> other
> sensors.
> The 727 ECM has 4 connectors.  The best I can remember, they are all about
> the
> same color (red) and size and are about 4 pin-rows deep, kinda closer to
> square shaped than the 3 long, thin rectangular shaped connectors of the
> 730.
> 
> Ted