More Junk Yard Parts
Tom Sharpe
twsharpe at mtco.com
Sat Feb 20 23:36:05 GMT 1999
--------------962FEB716647F99CC30C66ED
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
"two" identical 68 pin SMT chips labeled (Line 1) B58 047 4557 (L2) B1
L40300978 (L3) BB 33985. Also three 33030 power TO-220s, a 21 pin power
trans J 00029 3493 (L2) BD478.7 (L3) BBN -3, a 20dip BB 33 283 (L2)
L994A9394, a 8dip B58099 (L2) CEA 9405 (M). The motherboard is 3"x7"
labeled with 2268 328413-2 and 3 of those small white add on
resistor/cap nets. I have a small ECU from 94 Nissan Van also known as
a Mercury Voyager. The ECU has
Any idea what these parts are and what it's used for??? Cutte little
thing.. I got it for the 35 pin connector, same as Marrelli and some
French, Jap and German ECUs (and my Edelbrock)
I also got one of those GM hardened ones 16197037. (P5 on one side P1
on the other side of the boards)
What is a (L1) 185 (L2) 161196772 (L3) GBBE (L4) YQQQJ9607N 100 pin SMT?
It has an Intel 44dip Flash 16196427, AB28F200BX, E 5012AC, U60502J5D.
8 TO220s, one double wide, and 5 tripple wide power trans.
Any more ideas ???? Lotts of power here.
I also got that Mitsub MAF and a couple more Ford EEC-IVs.
There was a Volvo mechanical MAF but it looked too small for a 5
liter.. maybe a 4L.
There was a T_Bird blower in the trash if anyone is interested. It
rolled over smoothly and the rotors looked good...... What happened to
that 4 cyl list???? 2.3 Pinto with a Huffer!!!!
Going back for a harness and maybe a 350 Police package, eng/ trans/
ECU/ harness. $2500? plus shipping..
More later Tom S
--------------962FEB716647F99CC30C66ED
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<HTML>
<B>"two" identical 68 pin SMT chips labeled (Line 1) B58 047 4557
(L2) B1 L40300978 (L3) BB 33985. Also three 33030 power TO-220s, a 21 pin
power trans J 00029 3493 (L2) BD478.7 (L3) BBN -3, a 20dip BB 33
283 (L2) L994A9394, a 8dip B58099 (L2) CEA 9405 (M). The motherboard is
3"x7" labeled with 2268 328413-2 and 3 of those small white add on resistor/cap
nets. I have a small ECU from 94 Nissan Van also known as a Mercury
Voyager. The ECU has</B><B></B>
<P><B>Any idea what these parts are and what it's used for??? Cutte
little thing.. I got it for the 35 pin connector, same as Marrelli and
some French, Jap and German ECUs (and my Edelbrock)</B><B></B>
<P><B>I also got one of those GM hardened ones 16197037. (P5 on one
side P1 on the other side of the boards)</B><B></B>
<P><B>What is a (L1) 185 (L2) 161196772 (L3) GBBE (L4) YQQQJ9607N 100 pin
SMT?</B>
<BR><B>It has an Intel 44dip Flash 16196427, AB28F200BX, E 5012AC,
U60502J5D.</B>
<BR><B>8 TO220s, one double wide, and 5 tripple wide power trans. </B>
<BR><B> Any more ideas ???? Lotts of power here.</B><B></B>
<P><B>I also got that Mitsub MAF and a couple more Ford EEC-IVs.</B><B></B>
<P><B>There was a Volvo mechanical MAF but it looked too small for
a 5 liter.. maybe a 4L.</B><B></B>
<P><B>There was a T_Bird blower in the trash if anyone is interested. It
rolled over smoothly and the rotors looked good...... What
happened to that 4 cyl list???? 2.3 Pinto with a Huffer!!!!</B><B></B>
<P><B>Going back for a harness and maybe a 350 Police package, eng/
trans/ ECU/ harness. $2500? plus shipping..</B><B></B>
<P><B>More later Tom S</B>
<BR> </HTML>
--------------962FEB716647F99CC30C66ED--
More information about the Diy_efi
mailing list