aldl protocol

[Bruce Plecan]

-----Original Message-----
From: Pat Ford <pford at qnx.com>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Tuesday, January 05, 1999 11:22 AM
Subject: Re: aldl protocol


Go to   http://efi332.eng.ohio-state.edu/diy_efi
 hit archives, and seard title or content for aldl gcar diagnostics
programming 101  programming 808, then just read the whole
archives a couple times,  HOHOHAHA, welcome
Bruce

>
>I'm trying to down load the calibrations, planning on eventualy doing a
>custom controller
>
>when i pop the ecu open I'll report whats inside ( I'll try to draw a
>schematic)
>
>>   The ALDL can be used for diagnostics, and a scanner can be had for less
>> than the time to invent the link,
>
>wheres the fun in that 8*) , actualy this is a learning project as well,
>I am a class a mechanic and now a programmer, and want to try programming
>this beast
>
>>well again in the archives is alotta
>
>is there a search engine, and what are any helpful shortcuts
>
>thanks
>
>
>> material.
>> Bruce
>>
>>
>> >  Hi Folks;
>> > does anybody have the protocol used by gm on the aldl port.
>> >i have a 92 tracker and want to play around with some settings
>> >
>> >THANKS
>> >
>> >Pat Ford                           email: pford at qnx.com
>> >QNX Software Systems, Ltd.           WWW: http://www.qnx.com
>> >(613) 591-0931      (voice)         mail: 175 Terrence Matthews
>> >(613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M
1W8
>> >
>>
>>
>
>Pat Ford                           email: pford at qnx.com
>QNX Software Systems, Ltd.           WWW: http://www.qnx.com
>(613) 591-0931      (voice)         mail: 175 Terrence Matthews
>(613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M 1W8
>