Injector Selection

[David Rhoads]

I'm trying to track down a suitable set of injectors for the following,
any suggestions would be greatly appreciated.

apprx 19 lb/hr, 2.5gm/s ... @ apprx 40psi
preferrably Peak & hold for a Port injection setup.
I'll need to know the resistance for driver circuitry.
Another preferance would be a cone valve with a narrow spray pattern.

Application, manufacturer and part # is also needed for the folks at the
parts counter.

Most of the information that I've been able to find on the www
seems to be missing at least one piece of this info.  Most tech
departments aren't willing/able to provide the info needed for even
thier own products.  Go figure!

TIA

-- 
. David Rhoads II  
. Applied Dynamics International
. 3800 Stone School Road, Ann Arbor, Mi 48108
. (734) 973-1300                                                
. rhoads at adi.com   website:  www.adi.com